USBASP Verson 2.0

We recently selected a new USBASP supplier who has made a few improvements.

  • Addition of PPTC resettable fuse on 5V supply from USB
  • JP1 (Supply Target) now has a 3 pin header to allow the selection of 3.3V on pin 2 of the ISP connector
  • JP3 (Slow SCK) has been added back. This jumper was previously removed as the programmer supports software control of the SCK. Now to have a choice to use the jumper or the software control

As before, the programmers are just $18.00