Ribbon jumper cables are pretty cool, just break off what you need and use them with your PCB or breadboard based project. This month we add 4 new ribbon jumper cables to our range.
- 200mm ribbon with 40 x 1 pin male connectors on either end
- 200mm ribbon with 40 x 1 pin male and female connectors on either end
- 200mm ribbon with 40 x 1 pin female connectors on either end, and no housing
- 200mm ribbon with 40 x 1 pin male and female connectors on either end, and no housing
At first glance you might wonder why the cables without housings are useful.
All our ribbon jumper cables use a DuPont Male or Female terminal, and on most cables this is covered with a black plastic single pin housing. Not having a housing means you can add you own, meaning you get more choice. For instance you might have a 6 pin housing at one end, and 6 individual 1 pin housings at the other. Here's one we prepared earlier.
This leads onto our other new products, namely DuPont connector housing. All sizes from 1 to 10 pin
- 1 Pin DuPont Housing
- 2 Pin DuPont Housing
- 3 Pin DuPont Housing
- 4 Pin DuPont Housing
- 5 Pin DuPont Housing
- 6 Pin DuPont Housing
- 7 Pin DuPont Housing
- 8 Pin DuPont Housing
- 9 Pin DuPont Housing
- 10 Pin DuPont Housing