These jumper wires are just what you need for prototyping on a PCB. At either end there are 40 individual male connectors whilst in the middle, the wires are joined in a ribbon.
Simply pull the ribbon apart and split off what you need. For instance if you need a 4 pin cable, simply pull 4 cables off the ribbon.
|Number of conductors:||40|
|Conductor Gauge:||24 AWG (12 x 0.15mm)|
|Connector Type:||Dupont 1P Male|
|Capacitance core/core:||50 pF/m|
|Current rating at 25°C:||2A|
|Maximum Operating Temperature:||70°C|
|Maximum Conductor Resistance:||87.2 Ω/km|
|Minimum Insulation Resistance:||90 MΩ/km|