This kit contains what you need to start building ATMEGA8 circuits. The core components are the Atmega8 microcontroller and our popular 28 pin AVR development board. There are also a number of smaller components which assist in getting the Atmega8 working.

ATMEGA8 Highlights

• 8-Kbyte self-programming Flash Program Memory
• 1-Kbyte SRAM
• 512 Byte EEPROM
• 6 Channel 10-bit A/D-converter
• Up to 16 MIPS throughput at 16 Mhz
• 2.7 - 5.5 Volt operation

Part Number	Description	Quantity
PB-MC-AVR28	28 Pin AVR Full Size Development Board	1
CN-IC-2803	IC Socket 28 pin 7.62mm (0.3")	1
IC-ATMEGA8-16PU	ATMEL ATMEGA8-16PU (Atmega8) 8 Bit 8K AVR Microcontroller	1
PA-RY-MFQ1K	Resistor - Metal Film 1/4W - 1K	1
LE-5M-YE	LED General Purpose 5mm Yellow	1
CN-DC-21M	DC Jack 2.1 x 5.5mm	1
SC-DI-1N4004	1N4004 General purpose 1A Rectifier Diode	1
SC-VR-7805	L7805 +5V Linear Voltage Regulator	1
PA-PTC-500	PPTC Resettable Fuse - 72V, 500ma (RXEF050)	1
PA-CA-EL47U	Capacitor - Electrolytic 25V 47 uF	1
PA-CA-EL100U	Capacitor - Electrolytic 25V 100 uF	1
CN-ID-MR10	IDC Male connector (shrouded header), 10 pin, right angle leads	1
PA-RY-MFQ10K	Resistor - Metal Film 1/4W - 10K	1
SW-TM-SPST	Micro Tactile momentary SPST switch	1
PA-CY-16M	16MHz Crystal in HC/49S through hole package	1
PA-CA-CA22P	Capacitor - Resin Dipped Ceramic Axial 100V 22pF	2
PA-CA-CR100N	Capacitor - Resin Dipped Ceramic 50V 100nF	3
PA-IN-AX10U	Inductor - 10uH, Axial leaded	1